*
*
A pair that jack stands
*
*
*
A jack to lift the car
*
*
Genuine 5149098AA Oil pressure Switch
*
*
*
1/2-Inch drive 27mm deep socket
*
*
*
1/2-Inch journey ratchet
*
*
*
A 1/2-Inch universal joint
*
*
*
Eventually a 1/2-Inch drive expansion bar
*
*
*
15mm wrench
*

*
A defective oil pressure sensor switch may reason an oil leak. The oil light might come on and a P0522 error code have the right to be read on her OBD-2 scan tool.

You are watching: Pt cruiser oil pressure sensor location

You deserve to replace this sensor there is no draining oil.

You have to lift your automobile onto jack stands.

*
Let her engine cool off prior to working under your auto because the oil sensor switch is difficult to reach and also you might burn her skin.

See more: How Many Times Did God Part The Waters, Biblical Information

Go under your automobile and shot to find the oil sensor switch. It’s located to the left that the oil drainpipe plug behind some electrical harness:

*
In the next picture, you deserve to see the sensor connector:

*
With the 15mm wrench, eliminate the harness assistance (white arrowhead on the following picture):

*
You will have you an ext room to reach the oil sensor
*
To get the wiring off, you have to slide the red clip (as display in the following picture):

*

You deserve to push top top the connector and get the wiring off:

*

You can now use the 27mm deep socket to eliminate the sensor. Not so much room to work, therefore you may use a universal joint and also eventually an expansion bar.