You are watching: How to repair a roll top desk tambour
In bespeak to access the wood workdesk cover, you"ll need to first take the earlier panel turn off of the desk. It should be held on with little nails. When the back is off, girlfriend should be able to pull the roll peak right out of the track.
After taking it the end of the desk, ns realized that a roll peak is built of wood slats attached come a towel backing. The cloth on mine was old and had worn enough to allow the slats to pull apart. All the you"ll need to fix the desk is some hefty duty fabric and glue (I used wood glue, but I"m sure craft adhesive would work as well).
Cut the cloth to be around four inches much less than the broad of your role top and just slightly much less than the length.
The roll top on my workdesk was only broke into 2 sections, so i did not tear the old towel off and re-position everything. If your is broken in numerous pieces, though, it might be way to take it each ar apart and also glue it back onto the new fabric item by piece. Be sure to use enough glue the all the fabric is enclosed securely top top the wood.
Since ns was painting my desk, I likewise wanted to paint this ar on both sides. Paint a rolltop is a lot less complicated if it is done prior to putting it earlier in the desk. If you space interested in paint over the towel to do it "disappear," it helps to thin the paint out a little with some water. Permit the repaint to dry and also then insert the roll top ago into the track.
Once the ar is earlier in the desk, reattach the back panel through nails and also your desk is fixed! Isn"t that a an easy fix?
See more: 2 3/4 As An Improper Fraction ? Mixed Number To Improper Fraction Calculator