*
Windshield washer fluid reservoir replacement is unique to each vehicle only in the location of the windshield washer fluid reservoir. Besides the location you’re working in, almost every car on the road today will have the same procedure for replacing the reservoir. You may have to replace your windshield washer fluid reservoir because it cracked from freezing fluid or from an accident but either way it should be a relatively straightforward repair.

You are watching: How to remove windshield washer reservoir

Windshield Washer Fluid Reservoir Replacement

Remove Components Surrounding reservoir and its mountsDisconnect wiring and hosesRemove ReservoirInstall the new reservoir in reverse order

Remove Components Surrounding reservoir and its mounts

The first step in windshield washer fluid reservoir replacement is to access the mounting bolts or clips holding in place. Most washer fluid reservoirs sit somewhere behind the front bumper or in the very front of the engine bay so often times removal of the front bumper of wheel well liner is required. Most windshield washer fluid reservoirs also hold about a gallon of fluid and are designed to fit into a tight space and are therefore oddly shaped. Make sure to remove all the components you will need to pull the reservoir out of its mounting location.

Disconnect wiring and hoses

Once you’ve gained access to the windshield washer fluid reservoir you need to remove the wiring to the washer fluid pump and any hoses connecting the pump to the washer fluid nozzles. Many washer fluid reservoirs will have 2 pumps each with their own wiring harness and hose to supply washer fluid to both the front and back windshields. If your new washer fluid reservoir already has pumps installed you can just disconnect the wiring and hoses. Now is also a great time to replace any cracked or brittle hoses.

Remove Reservoir

Once you’ve got everything disconnects the next step is to actually replace the reservoir. If you did a good job in step one, this should only include taking out any mounting bolts or clips and pulling the old reservoir free.

See more: Psi To Inhg Convert Psi To Inches Of Mercury (32°F) Conversion

Installing the reservoir in reverse order

Installing the new reservoir should be straightforward now that you have the old one out. Our recommendation is to install the new reservoir, connect the hoses and wiring, fill it with washer fluid and try both the front and rear washers before you put the bumper and any shielding on. That way if there is a malfunction or your system requires further diagnosis you already have access to everything.

When it comes to filling your new windshield washer fluid reservoir, use BlueDevil Windshield Washer Fluid Concentrate. BlueDevil Windshield Washer Fluid Concentrate is a powerful washer fluid that can clean the toughest grime off your windshield without damaging any surface finish on your car and makes up to 16 gallons!

You can find BlueDevil Windshield Washer Fluid Concentrate at any of our partnering local auto parts stores like:

AutoZoneAdvance Auto PartsBennett Auto SupplyCarQuest Auto PartsNAPA Auto PartsO’Reilly Auto PartsPep BoysFast TrackBumper to Bumper Auto Parts SpecialistsS&E Quick Lube DistributorDYK AutomotiveFisher Auto Parts storesAuto Plus Auto Parts storesHovis Auto & Truck Supply storesSalvo Auto PartsAdvantage Auto StoresGenuine Auto Parts storesBond Auto Parts storesTidewater Fleet SupplyBumper to Bumper Auto PartsAny Part Auto PartsConsumer Auto Parts

Pictures Provided By:

windshield_washer_fluid_reservoir_replacement.jpg – By Pisittar – Licensed by Getting Images – Original Link