The power-steering unit ~ above the Vehicles is a hydraulic unit the assists turning the prior tires while driving. Power-steering fluid is required to assist run the unit. Despite power-steering fluid is not consumed prefer gasoline, a leak may reduce the quantity of fluid in your car. If you hear a according to squeak when turning the wheel, check the power-steering liquid level and add additional liquid if needed.

Under The Hood:

How to include Power Steering liquid to Pontiac G6 2006 Car

Make certain the engine is cool. Locate the strength steering reservoir. ~ above the 2006 G6, the is an installed to the power steering pump near the alternator.

You are watching: 2006 pontiac g6 power steering reservoir location

Remove the dipstick from the reservoir. The fluid level should be in the cross-hatched area of the dipstick.

Add small amount of strength steering liquid until the level is correct. Carry out not overfill the reservoir. If too much fluid is added, remove the excess.

How to include Power Steering liquid to a 1998 Pontiac Bonneville

Park the 1998 Pontiac Bonneville top top a flat surface, connect the parking brake and also open the hood to enable the engine to cool. Friend should include power-steering fluid when the engine is cool.

Locate the liquid reservoir in the engine compartment. The reservoir is situated near the ago of the passenger next of the engine compartment, to the right of the radiator coolant reservoir.

Open the cap of the power-steering reservoir and also wipe off the dipstick with a rag.

Reattach the cap, eliminate it indigenous the reservoir and check the liquid level ~ above the dipstick. You need to add fluid if the liquid level is listed below the “Full Cold” note on the dipstick.

Pour power-steering fluid into the reservoir in tiny amounts and also continually inspect the liquid level top top the dipstick utilizing the method described in step 4.

Secure the fluid reservoir cap to the reservoir when the liquid level get the “Full Cold” mark.

Items you will need


Power-steering fluid

How to include Power Steering liquid to a 2002 Park Avenue

Allow the engine come cool thoroughly prior to attempting to examine your power steering fluid. Eliminate the power steering reservoir cap and wipe off the dipstick attached.

Screw the reservoir cap back into the power steering unit and also take it ago off again to read the dipstick. Much like checking your oil dipstick, you must wipe turn off the strength steering liquid from the dipstick originally to eliminate the excess fluid that has sloshed around it due to normal driving.

Add power steering fluid to the reservoir if the dipstick reads at the "FILL" mark or less than half way between the "FILL" and "HOT" marks. Feed the funnel bathtub into the strength steering reservoir and add a small bit of fluid in the funnel at a time.

See more: Why Is It Bad For Pet Anacondas Have Escaped Into The Swamps Of Florida ?

Check the power steering liquid levels again by instead of the cap ago on to the reservoir and then remove it. Add more fluid to the reservoir till the dipstick reads the liquid level halfway between the "FILL" and "HOT" marks. Perform not overfill the reservoir, as damages will occur to the strength steering pump.