This will conserve you $800! her voltage regulator is located inside that the PCM. Now I will show you exactly how to install an external voltage regulator. Complete cost $25.40


*

This is every you need!


*

Disconnect the battery


*

Remove the battery.

You are watching: 1996 jeep cherokee voltage regulator location


*

Locate the blackbox connector ~ above the ago of the alternator.


*

Disconnect the black box connector.


*

Now take 2 barrel, and eyelets connectors and also two lengths of cable long enough to go from the voltage regulator come the alternator. Attach a barrel and then Eyelet connector to the end of each one.


You will also need to include a length of wire to the barrel end of among the wires. This cable will affix to a 12 volt source. Friend will require to find the positive ar on the alternator.


*

The wire through the battery wire connected to that goes come the height terminal the the voltage regulator. This is an extremely important if you select the dorn terminal you will certainly pop the voltage regulator.


*

Now connect the wires to the voltage regulator and also then reinstall your battery. Make certain you plug the wire v the battery voltage come the peak terminal.

See more: Driving Distance From Ormond Beach To Orlando, Fl, How Far Is Ormond Beach From Orlando


Once you have reinstalled her battery friend can connect wire comes from the optimal terminal the the voltage regulator come the battery.


1.0 Voltage regulator2.0 Barrel connectors1.0 electric tape3.0 Eyelets3.0 self tapping screws4.0ft 14 gage wire1.0 wire crimpers Hand tools1.0 Alternator battery tester